14g Titanium Dermal Anchor with 2mm or 2.5mm Rise & Double-Hole Base — Price Per 1

Pick Rise • Two-Hole Base • Internal • Price Per 1
In stock
As low as $3.15
More Information
SKU derm016
Weight 0.0010
Brand Painful Pleasures
Material Titanium 6Al-4V-Eli ASTM F-136
Threading Internal 1.2mm

14g Titanium Microdermal Anchor — 2mm or 2.5mm Rise and Double-Hole Base — Internal 1.2mm

Each of these 14g Titanium Dermal Anchors is made from one solid piece of implant-grade titanium, has a .5mm-thick base with two holes (1 small hole on the short side and an oblong hole on the long side), and comes with your choice of either a 2mm or 2.5mm rise. These microdermal anchors work with 14 gauge internally-threaded dermal piercing tops and labret tops with a 1.2mm thread pattern. Use them with any of our dermal top discs, balls, stones and other ends with the same 1.2mm internal thread pattern.

These titanium dermal anchors are priced per one. When you purchase in bulk, you can mix sizes in multiples of 10. For example, you can request 20 2mm and 30 2.5mm microdermal anchors in the customer notes field. Bulk ordering can be done in multiples of 10 only.


  • Material: Titanium 6Al-4V-Eli ASTM F-136
  • Gauge: 14g (~1.6mm)
  • Rise Options: 2mm, 2.5mm
  • Threading: Internal 1.2mm
  • 2-Hole Base Size: 6.85mm total length; 0.5mm thick
  • Price per one dermal anchor (top not included)
Size Table

Standard Body Jewelry Measurements

The following webchart is a quick reference guide for standard body jewelry measurements and how to measure basic body jewelry. Please print this webchart to help measure your body jewelry accurately.

Size Reference Chart

Visit our PainfulPleasures Infocenter for additional body jewelry information. There, you will find detailed articles on standard body jewelry sizes, how to measure body jewelry, basic body jewelry, and more.

Standard Body Jewelry Threading

Ensure compatibility between standard (non-custom) PainfulPleasures body jewelry parts using the tables below. More information on threading, including custom thread patterns, can be found in our Threading Infocenter article.

Internally threaded jewelry has a threaded post on the top and/or end, which is then inserted into a threaded hole in the barbell shaft.

Internal Thread Patterns by Gauge


18g, 16g

14g, 12g


Internal Thread Pattern

0.8mm or 0.9mm



Externally threaded jewelry has a threaded post on the barbell shaft, which is then inserted into a threaded hole in the top and/or end.

External Thread Patterns by Gauge


18g, 16g

14g, 12g, 10g

External Thread Pattern



View Shipping & Return Policies
Reviews / Questions